Lock

LOCK_COMMAND code is 0x50

The command is used to lock the lock.

Input parameters

param[0]: if not attached to the command then the default value is NONE.

Param name	Value	Description
NONE	0x00	Lock the lock
FORCE	0x02	Forces to lock till jam. Should be used only in emergency case.

Result

Result name	Value	Description
SUCCESS	0x00	Operation accepted.
INVALID_PARAM	0x01	Invalid params passed to lock.
ERROR	0x02	Error occured.
BUSY	0x03	Lock is currently performing other operations. Wait for changing state.
NOT_CALIBRATED	0x05	Lock does not have calibration. Please calibrate the lock.
DISMOUNTED	0x09	Lock is not mounted on doors.

Output parameters

none

Example

1. Form message for encryption,

Command Value

0x50

2. Encrypt prepared message,

3. Send it on API commands characteristic,

4. Receive response on API commands characteristic,

5. Decrypt received response discarding first header byte,

6. Parse response

Response

0x00 (SUCCESS)