Get Lock State
GET_LOGS_TLV code is 0x5A
Gets actual Lock State.
Input parameters
none
Result
Result name |
Value |
Description |
SUCCESS |
0x00 |
Command accepted. |
Output parameters
State name |
Value |
Description |
UNCALIBRATED |
0x00 |
Lock does not have any calibration. |
CALIBRATION |
0x01 |
Lock is in calibration mode. |
UNLOCKED |
0x02 |
Lock is in calibrated unlocked position. |
PARTIALLY_UNLOCKED |
0x03 |
Lock is in the middle of calibrated locked/unlocked positions. |
UNLOCKING |
0x04 |
Lock is rotating to an unlocked position. |
LOCKING |
0x05 |
Lock is rotating to a locked position. |
LOCKED |
0x06 |
Lock is in the calibrated locked position. |
PULL_SPRING |
0x07 |
Lock is in calibrated pull spring position. |
PULLING |
0x08 |
Lock is rotating to pull spring position. |
UNKNOWN |
0x09 |
Lock lost angular position but knows directions of unlocked/locked positions. |
Status name |
Value |
Description |
STATUS_OK |
0x00 |
Last lock state change without issues. |
STATUS_ERROR_JAMMED |
0x01 |
Lock jammed during last state change. |