Lock state notification

LOCK_STATUS_CHANGE code is 0xBA.

Lock sends its state change.

Parameters

Param[0] - Actual state

State name	Value	Description
UNCALIBRATED	0x00	Lock does not have any calibration.
CALIBRATION	0x01	Lock is in calibration mode.
UNLOCKED	0x02	Lock is in calibrated unlocked position.
PARTIALLY_UNLOCKED	0x03	Lock is in the middle of calibrated locked/unlocked positions.
UNLOCKING	0x04	Lock is rotating to an unlocked position.
LOCKING	0x05	Lock is rotating to a locked position.
LOCKED	0x06	Lock is in the calibrated locked position.
PULL_SPRING	0x07	Lock is in calibrated pull spring position.
PULLING	0x08	Lock is rotating to pull spring position.
UNKNOWN	0x09	Lock lost angular position but knows directions of unlocked/locked positions.

Param [1] - Last lock state change status

Status name	Value	Description
STATUS_OK	0x00	Last lock state change without issues.
STATUS_ERROR_JAMMED	0x01	Lock jammed during last state change.